140 x 200 mm 2,0 mm

DX 53 Z 275 (20µm according to DIN 1052 ) CE to 14545

from German steel mill with zinc coating 275 g/m² - 20 µm each side according to DIN 1052

Hole diameter 5,0 mm.  From certified FMG production. Don´t forget nails !

40 x 160 mm 2,0 mm

DX 53 Z 275 ( 20µm according to DIN 1052 ) CE to 14545

from German steel mill with zinc coating 275 g/m² - 20 µm each side according to DIN 1052

Hole diameter 5,0 mm.  From certified FMG production. Don´t forget nails !

80 x 400 mm 2,0 mm

DX 53 Z 275 (20µm according to DIN 1052 ) CE to 14545

from German steel mill with zinc coating 275 g/m² - 20 µm each side according to DIN 1052

Hole diameter 5,0 mm.  From certified FMG production. Don´t forget nails !

80 x 200 mm 2,0 mm

DX 53 Z 275 (20µm according to DIN 1052 ) CE to 14545

from German steel mill with zinc coating 275 g/m² - 20 µm each side according to DIN 1052

Hole diameter 5,0 mm.  From certified FMG production. Don´t forget nails !

60 x 400 mm 2,0 mm

DX 53 Z 275 (20µm according to DIN 1052 ) CE to 14545

from German steel mill with zinc coating 275 g/m² - 20 µm each side according to DIN 1052

Hole diameter 5,0 mm.  From certified FMG production. Don´t forget nails !

60 x 300 mm 2,0 mm

DX 53 Z 275 (20µm according to DIN 1052 ) CE to 14545

from German steel mill with zinc coating 275 g/m² - 20 µm each side according to DIN 1052

Hole diameter 5,0 mm.  From certified FMG production. Don´t forget nails !

60 x 140 mm 2,0 mm

DX 53 Z 275 (20µm according to DIN 1052 ) CE to 14545

from German steel mill with zinc coating 275 g/m² - 20 µm each side according to DIN 1052

Hole diameter 5,0 mm.  From certified FMG production. Don´t forget nails !

120 x 240 mm 2,0 mm

DX 53 Z 275 (20µm according to DIN 1052 ) CE to 14545

from German steel mill with zinc coating 275 g/m² - 20 µm each side according to DIN 1052

Hole diameter 5,0 mm.  From certified FMG production. Don´t forget nails !

60 x 160 mm 2,0 mm

DX 53 Z 275 (20µm according to DIN 1052 ) CE to 14545

from German steel mill with zinc coating 275 g/m² - 20 µm each side according to DIN 1052

Hole diameter 5,0 mm.  From certified FMG production. Don´t forget nails !